emmyliu
Benutzer
- Beiträge
- 5
Ich Keilriemen meines Autos der vergangenen Woche. Ich möchte meine Schritte hier zu zeigen.
Aber Deutsch ist ein bisschen schwierig für mich, diese Art von Artikel zu schreiben. Also habe ich in Englisch zu schreiben.
Hoffe, Sie haben nichts dagegen.
Change fan belt steps
First step:
Take the old fan belt off of the pulleys. You will need a wrench or two to release the tension on the belt. Tension systems differ between makes, but the effect of each is still the same: They maintain a tight belt when in use, and they allow you to adjust the tension. In this case, you want to reduce the tension on the belt so that you can slide it off of the pulleys.
Second step:
You'll need to get the right size replacement belt at any local auto parts store. It's very important to match the new fan belt shape with the old one. Take the old belt with you to the store to compare with the new belt. Sometimes the new belt is a little bit different length. If the new belt is a centimeter or so short, then that is OK. It will likely stretch out a little bit. If the new belt is a little too long, ask the salesperson to help you find a closer match. A longer belt isn't acceptable.
Third step:
When replacing fan belts, route the new belt through the pulleys so that it uses the exact same path as the old belt. You may need to loosen the belt tensioner a little bit more in order to slip the new belt onto the final pulley. Refer to the belt diagram to check your work. After the belt is in place, tighten the belt using the tension adjuster on your car.
Attention:
1. The belt should be taut, and should not squeal when the engine is running.
2. Don't get it too tight when tighten the belt.
Aber Deutsch ist ein bisschen schwierig für mich, diese Art von Artikel zu schreiben. Also habe ich in Englisch zu schreiben.
Hoffe, Sie haben nichts dagegen.
Change fan belt steps
First step:
Take the old fan belt off of the pulleys. You will need a wrench or two to release the tension on the belt. Tension systems differ between makes, but the effect of each is still the same: They maintain a tight belt when in use, and they allow you to adjust the tension. In this case, you want to reduce the tension on the belt so that you can slide it off of the pulleys.
Second step:
You'll need to get the right size replacement belt at any local auto parts store. It's very important to match the new fan belt shape with the old one. Take the old belt with you to the store to compare with the new belt. Sometimes the new belt is a little bit different length. If the new belt is a centimeter or so short, then that is OK. It will likely stretch out a little bit. If the new belt is a little too long, ask the salesperson to help you find a closer match. A longer belt isn't acceptable.
Third step:
When replacing fan belts, route the new belt through the pulleys so that it uses the exact same path as the old belt. You may need to loosen the belt tensioner a little bit more in order to slip the new belt onto the final pulley. Refer to the belt diagram to check your work. After the belt is in place, tighten the belt using the tension adjuster on your car.
Attention:
1. The belt should be taut, and should not squeal when the engine is running.
2. Don't get it too tight when tighten the belt.
